Hydroxypinacolone Retinoate (HPR) is a retinoic-acid ester used in professional well-aging and skin-renewal formulation development. ZLEY®HPR is supplied as a yellow crystalline powder; the published TDS specifies NLT 99.0% purity by HPLC and a suggested use level of 0.01–0.3%.

The SDS lists ready solubility in selected carrier solvents including 1,2-pentanediol, 1,2-hexanediol, diacetone alcohol, ethoxydiglycol and dimethyl isosorbide. The TDS recommends oil-based or structured emulsion routes and does not recommend a pure-water system or a dilute emulsion with a viscosity figure below 1,500 (measurement unit and method are not stated in the TDS).

Protect the material and finished formula from avoidable light and oxygen exposure. Confirm the current TDS/SDS, target-market assessment, compatibility, stability and packaging before commercial release.

Hydroxypinacolone Retinoate — ZLEY®HPR

ИНЦИ: Гидроксипинаколона ретиноат
CAS: 893412-73-2
Состав/Чистота: NLT 99.0% методом ВЭЖХ
Появление: Желтый кристаллический порошок
Рекомендуемая дозировка: 0,01–0,3%
Растворимость: Растворим в некоторых гликолях и растворителях-носителях; см. актуальную техническую спецификацию (TDS) и паспорт безопасности (SDS)

ЕСЛИ ВАМ НУЖНЫ ОБРАЗЦЫ

Пожалуйста, заполните информацию

ZLEY®HPR at a glance

ZLEY®HPR is a high-purity Hydroxypinacolone Retinoate grade for retinoid skincare development. Its published TDS specifies NLT 99.0% HPLC purity and a suggested use level of 0.01–0.3%.

ИНКИ
Гидроксипинаколона ретиноат
CAS
893412-73-2
Содержание / чистота
NLT 99.0% методом ВЭЖХ
Появление
Желтый кристаллический порошок
Рекомендуемая дозировка
0,01–0,3%
Растворимость
Easily soluble in 1,2-pentanediol, 1,2-hexanediol, diacetone alcohol, ethoxydiglycol and dimethyl isosorbide
Детали состава и закупки Просмотреть 10 дополнительных технических характеристик
Этап сложения
Use a validated carrier-solvent/oil-phase route; the TDS does not recommend pure-water systems or dilute emulsions (viscosity below 1,500; measurement unit and method are not stated)
Температура обработки
Not stated in the published TDS; minimize heat and confirm the grade-specific process before scale-up
рН
Не указано для поставляемого порошка
Стабильность
Use antioxidants and chelating support where appropriate; validate light, oxygen, compatibility and packaging stability
Хранение
Хранить в закрытой упаковке в прохладном, сухом и хорошо проветриваемом месте, вдали от несовместимых материалов и продуктов питания
Срок хранения
2 года при соблюдении условий хранения TDS
Приложения
Oil-based systems, water-in-oil, water-in-silicone and silicone-in-water systems; well-aging and skin-renewal formulations
Упаковка
Пакет из алюминиевой фольги весом 1 кг с полиэтиленовой подкладкой, в соответствии с опубликованным техническим паспортом продукта (TDS)
минимальный объем заказа
Предоставляется по запросу; уточняйте количество в упаковке, сроки поставки и пункт назначения у отдела продаж ZLEY
TDS / SDS / COA
TDS linked; SDS linked; Batch-specific COA available on request

Значения, отмеченные для подтверждения, намеренно не оцениваются. Перед масштабированием производства или закупкой запрашивайте актуальные TDS/SDS для конкретного класса и сертификат анализа (COA) партии.

Техническая документация

Product FAQ

What is ZLEY®HPR?

ZLEY®HPR is a high-purity Hydroxypinacolone Retinoate grade for retinoid skincare development. Its published TDS specifies NLT 99.0% HPLC purity and a suggested use level of 0.01–0.3%. The declared INCI is: Hydroxypinacolone Retinoate.

What is the recommended use level for ZLEY®HPR?

The published or currently recorded use level is 0.01–0.3%. Final use level must be checked against the current TDS, the complete formula, target-market rules and finished-product testing.

How should ZLEY®HPR be incorporated?

Solubility: Easily soluble in 1,2-pentanediol, 1,2-hexanediol, diacetone alcohol, ethoxydiglycol and dimethyl isosorbide. Addition phase: Use a validated carrier-solvent/oil-phase route; the TDS does not recommend pure-water systems or dilute emulsions (viscosity below 1,500; measurement unit and method are not stated). Processing temperature: Not stated in the published TDS; minimize heat and confirm the grade-specific process before scale-up.

Какие технические и закупочные документы доступны?

TDS is linked on this page; SDS is linked on this page; request the batch-specific COA. Packaging and MOQ are order-specific and should be confirmed with ZLEY sales before purchase.

Можно ли использовать порошок ZLEY HPR в сыворотке на основе чистой воды?

В опубликованном техническом описании продукта (TDS) данный сорт не рекомендуется для систем с чистой водой или разбавленных эмульсий. Выберите подходящий носитель и структуру состава при поддержке технической службы, а затем проверьте совместимость и стабильность.

What pH and processing temperature should I use for HPR?

The linked powder TDS does not specify a universal finished-formula pH range or maximum addition temperature. Request grade-specific process guidance rather than inferring a limit from the melting point or another retinoid.

Ответственное лицо за техническую экспертизу: ZLEY Group Technical Team Source review date: